GPU-82: Custom overscan / underscan settings reset at reboot
 |  
About AMD  |  News  |  Compare & Shop  
Go Search

 Custom overscan / underscan settings reset at reboot 
Last Updated
 9/27/2010   
Article Number
 GPU-82 

Issue Description:
An issue was identified in which a High Definition Multimedia Interface (HDMI) connected display monitor(s) may lose it's custom overscan / underscan settings each time the system is rebooted.

Technical Details :
This issue affects ATI Radeon™ series graphics cards connected to a display device(s) using a HDMI connection and running Windows®  7 or Windows Vista® (32-Bit and / or 64-bit Edition).

Recommendation:
An ATI Catalyst 10.9a hotfix has been released to address this issue.

Download and install the ATI Catalyst hotfix from the following location:

Refer to Article 20870 for detailed instructions on how to properly install the ATI Catalyst Hotfix.

Note! This hotfix is provided as is and not supported by AMD. It has not completed full AMD testing and is only a driver update.
 


DISCLAIMER

The information presented in this document is for informational purposes only and may contain technical inaccuracies, omissions and typographical errors. AMD reserves the right to revise this information and to make changes from time to time to the content hereof without obligation of AMD to notify any person of such revisions or changes.

AMD MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE CONTENTS HEREOF AND ASSUMES NO RESPONSIBILITY FOR ANY INACCURACIES, ERRORS OR OMISSIONS THAT MAY APPEAR IN THIS INFORMATION. AMD SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT WILL AMD BE LIABLE TO ANY PERSON FOR ANY DIRECT, INDIRECT, SPECIAL OR OTHER CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF ANY INFORMATION CONTAINED HEREIN, EVEN IF AMD IS EXPRESSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.