The minimum requirements to run AMD CrossFire are:
Note - Running more than one graphics card on a system may require a higher rated power supply or a power supply that features enough power connections for each graphics card. Please refer to the list of
AMD CrossFire certified power supplies.
AMD Crossfire is limited to a maximum of four GPUs in an AMD CrossFire configuration; either four AMD Radeon graphics cards each with a single GPU or two AMD Radeon graphics cards that feature two GPUs per graphics card, such as the AMD Radeon HD 6990.
The overall performance will be adjusted to match the memory speeds and engine clocks of the lower clocked card. To obtain the ideal performance, graphics cards should be paired correctly using the AMD Crossfire compatibility chart.
AMD Crossfire™ technology enables the output connectors on the primary graphics card. The primary graphics card is the one located closest to the CPU.
The Clone (presentation), Extended, and AMD Eyefinity technology modes can be enabled on each of the installed graphics card by running AMD Crossfire™ technology on your system. Multiple monitor setups can be configured through the AMD Catalyst™ Control Center or AMD VISION Engine Control Center.
Here is a brief description of each mode and its function:
Clone (Presentation) Mode
Note: Clone mode does not clone displays on different graphics cards. Clone mode only works on displays that are connected to the same graphics cards.
AMD Eyefinity Group Mode
Note: The AMD Eyefinity group mode is not available under the Microsoft® Windows XP operating system.
For more information on the AMD Eyefinity Group Configuration, please also read our Setting up AMD Eyefinity Technology Display Groups knowledgebase article.
There are two main
ways to find out if your system can support AMD Radeon™ Dual Graphics. One, you
can go to www.amd.com/dualgraphics
and get the latest information, including all supported discrete GPUs. Two, if
you purchase an AMD A-Series APU for your desktop PC as an individual
processor-in-a-box (PIB), the right hand panel will show the supported discrete
GPUs for that particular APU model.
To take advantage of AMD Radeon™ Dual Graphics, you must use a compatible AMD A-Series APU to pair with your supported AMD Radeon™ HD 6000 Series card. After installation of your graphics card, install the latest AMD graphics drivers. After driver installation, the option to enable AMD Radeon™ Dual Graphics should become available in the AMD VISION Engine Control Center.
Once installed, go into the "Performance" section of the AMD VISION Engine Control Center and check the box that says 'Enable Crossfire™' - this will allow the AMD A-Series APU graphics to work in tandem with the select AMD Radeon™ HD 6000 Series GPU installed for increased graphics performance.
For best performance,
AMD recommends plugging the display into your discrete graphics card. This will
ensure that even applications that do not take advantage of AMD Radeon™ Dual
Graphics will still be able to run on the faster graphics card in your system.
However, to be more accurate, we recommend that you plug your monitor into the
AMD Radeon™ graphics with the higher model number. If that is your APU, plug
into the motherboard, if it is your discrete graphics card, plug into that.
AMD Radeon™ Dual Graphics was designed only for the latest DirectX® levels to allow AMD to focus resources on providing an optimal user experience on the latest graphics technologies. AMD encourages users to take advantage of these and numerous other innovations that have come to market recently by upgrading system hardware.
AMD Radeon™ HD 6000 Series graphics, found in both AMD A-Series APUs and discrete video cards, are designed to deliver the best possible DirectX® 11 experience. As such, the dual graphics performance increase is applicable to select DirectX® 11 & DirectX® 10 enabled applications. For DirectX® 9 applications, the combined performance will be disabled and the fastest graphics engine will perform those tasks; however, users will still experience the speed and performance of AMD Radeon™ graphics.
AMD Radeon™ Dual Graphics was designed for the latest Microsoft Windows operating system; this allows AMD to focus resources on providing an optimal user experience on the latest platform technology. AMD encourages users to upgrade to the latest operating system to take full advantage of the features and benefits of Windows 7 (including DirectX® 10 & Direct® 11) to ensure users get the best performance for what they do with their PC. For users that continue to use Windows XP and previous versions, dual graphics combined performance functionality will be disabled and the fastest graphics engine will perform those tasks.
AMD Radeon™ Dual
Graphics will support AMD Eyefinity Technology as long as your discrete GPU
supports AMD Eyefinity Technology and monitors are plugged into the discrete
AMD Radeon™ Dual
Graphics is a form of AMD CrossFireX™ Technology and with the current solution
only displays from the 'master' graphics device (the one that monitors are
plugged into) are available. The other displays are disabled. To ensure your
displays remain available, make sure to connect your displays to the 'master'
graphics device. The 'master' device settings can be found in the AMD VISION
Engine Control Center, which is the user interface for the drivers and
AMD CrossFire™ is a technology which can combine up to four GPUs to speed up the rendering of 3D graphics. In AMD CrossFire setups all displays outputs are connected to the primary (master) card and outputs on the slave card(s) are disabled. AMD CrossFire™ only works in full screen mode.
AMD CrossFire: CrossFire is the AMD brand name for multiple GPU configurations.
AMD CrossFireX: AMD CrossFireX was a rebranded term for CrossFire, these terms are interchangeable. However, AMD now only use the term CrossFire.
AMD Dual Graphics: This technology refers to the combination of the graphics processor on the APU and a single discrete graphics card working together in CrossFire. A discrete graphics card is a standalone graphics card connected to the PCIe slot on the motherboard.
AMD Hybrid CrossFire: Hybrid CrossFire uses the integrated graphics on a motherboard chipset in combination with a discrete graphics card. This is technology is obsolete and no longer supported.
In unsupported configurations graphics performance may be negatively impacted. AMD suggests using only the recommended cards on the AMD CrossFire Compatibility Charts.
Yes, AMD CrossFire and AMD Eyefinity are compatible. Since only displays connected to the primary (master) card are supported in AMD CrossFire, the number of displays that can be enabled in AMD Eyefinity mode is limited to the number of supported displays of the primary card.
If you would like further information regarding AMD Eyefinity setup please visit, www.amd.com/FAQ1.
If you would like to setup AMD CrossFire between two or more discrete graphics cards (PCIe socket cards) correctly, please read the following steps:
1. Please make sure that the power supply unit meets the recommended requirements of the complete AMD CrossFire setup. There are free 3rd party tools available online that can determine the power requirements of your system.
2. Check with your motherboard manufacturer that your motherboard is AMD CrossFire compatible with the required number of PCIe x16 slots available (running at a minimum of PCIe x8 speed).
3. Check the AMD CrossFire Compatibility Charts to verify that the cards you are using are recommended for AMD CrossFire.
4. Please make sure that you are properly grounded and the system is powered off before installing the graphics cards.
5. Connect the preferred card into the primary PCIe slot on the motherboard (check motherboard manual to determine the primary PCIe slot).
6. Connect additional cards to the secondary PCIe slots on the motherboard. Note: AMD CrossFire only supports up to 4 GPUs.
7. If any AMD CrossFire bridge cables were included with the graphics cards, please connect them now.
8. After starting up the system ensure that you install the latest compatible driver for the graphics cards.
9. Go to the AMD CrossFire option in the AMD Catalyst™ Control Center and make sure that the check box for "Enable AMD CrossFire" is checked.
Note: For AMD Dual Graphics setup with an APU and a single discrete graphics card connected to the PCIe slot please see the AMD Dual Graphics FAQ.
As long the "Enable AMD CrossFire" option in the AMD Catalyst™ Control Center is selected then the AMD CrossFire setup is working. Please remember that AMD CrossFire is only enabled while playing AMD CrossFire compatible games in "Full Screen" mode.
If the "AMD CrossFire" option is not available in the AMD Catalyst™ Control Center then you will need to verify that the setup has been done correctly.
1. Please check the "How do I setup CrossFire on my system?" FAQ to make sure that everything is setup correctly.
2. If you still do not have this option, please check:
Some of the AMD Radeon™ R9 series cards do not need to be connected via AMD CrossFire bridges, but instead communicate between the cards via XDMA over the PCIe bus. Please refer to the "AMD CrossFire Support" on the Radeon R series specifications page as to what is required.
Yes, it is possible to setup a single discrete AMD graphics card in combination with an AMD APU's built-in graphics processor. This setup is referred to as AMD Dual Graphics.
Please be aware that some BIOS options will likely need to be changed in order for this setup to work. Please contact your motherboard manufacturer about how to set this up. Once you have setup the BIOS options correctly and have verified that the discrete graphics card is compatible with the APU you are using, the option for AMD Dual Graphics will be available in the AMD Catalyst™ Control Center.
AMD Dual Graphics setup only works with a single AMD discrete graphics card in combination with the AMD APU.
In order to setup AMD Dual Graphics correctly, please read the following steps:
1. Check the AMD Dual Graphics Charts to verify which cards are recommended for AMD Dual Graphics with your APU.
2. Check with your motherboard manufacturer as to which PCI-e slot should be used. AMD Radeon™ graphics cards require PCIe x16 slot (running at a minimum of x8 speed) to function correctly.
3. Please contact your motherboard manufacturer about how to correctly access and configure the BIOS to enable AMD Dual Graphics.
4. Once you have followed the above AMD Dual Graphics will be available in the AMD Catalyst™ Control Center.
Please refer to the troubleshooting steps in "I do not see any AMD CrossFire™ option in the AMD Catalyst™ Control Center?" FAQ
While in AMD CrossFire mode only the primary (master) card can be used as the output source. All other cards in the AMD CrossFire setup are being used only to speed graphics processing. In order to get an output from the secondary card(s), disable AMD CrossFire in the AMD Catalyst™ Control Center.
There are no limitations on what output connections can be used on the primary (master) card.
Please use the AMD Catalyst™ Control Center to verify that AMD CrossFire is enabled.
1. Please make sure the game is running in "Full Screen" mode. Switching out of "Full Screen" mode would cause AMD CrossFire to be temporarily disabled until the game returns to "Full Screen" mode.
2. Please ensure that the game is updated with the latest patches.
3. Experiment with different "Vertical Sync" and "Antialiasing" options to see which setting provides the best performance.
4. Game support forums can provide useful tips on improving gaming performance.
5. If you have installed the AMD Gaming Evolved application (Raptr), it has an option to automatically optimize your game configuration to provide the best performance.
If your system meets the minimum power requirements, you can add a standalone graphics card to your setup. However, you will not be able to "clone/duplicate" monitors from the AMD CrossFire setup onto this card. You can only "clone/duplicate" the monitors that are physically connected to this additional graphics card.
AMD CrossFire™ is supported on Linux only if there is an application profile available. Also, Linux does not support XDMA AMD CrossFire.